EnviroMIG Welding Wires

Benefits of EnviroMIG Copper Free Welding Wire

• Superior feedability
• No copper flaking insider the liner
• No copper fume emission
• Enhanced corrosion resistance
• Superior performance in automatic welding applications
• Better weld bead appearance
• Good resistance to porosity with zinc primer
• Instant retrieval of batch certification to EN 10204 3.1
• Excellent restrike properties
• Longer tip life
• Less spatter

Superior Feedability

EnviroMIG enhances stability of the welding current and produces much more consistent results compared to both traditional copper coated and conventional copper free welding wire.

Longer Tip Life

You can visibly see the tip is in a better condition both before and after cleaning when EnviroMIG is utilised compared to a competitor's copper free welding wire.

It's a similar story post-weld with EnviroMIG producing a visibly brighter and higher quality finish whereas copper coated, and conventional copper free welding wire produces almost identical results.

Less Spatter

Spatter Generation

In this test, the EnviroMIG volume of spatter is less regarding the welding current (amperage) versus copper coated and conventional copper free welding wire.

No Copper Fume Emission

The EnviroMIG fume emission is fewer (mg/min) at a welding current of 200 amps and above compared to conventional copper free and approximately 33% less emission than copper coated welding wire.

Regarding Cu Content, at a welding current of 220 amps and above, EnviroMIG produces less volume (mg/min) than conventional copper free whereas copper coated welding wire produces drastically more than both conventional copper free and EnviroMIG.

Instant Retrieval of Batch Certification

• Step 1: Scan the QR code on the box
• Step 2: Enter the lot number located on the side of the box/reel of wire
• Step 3: View your batch certificate to EN 10204 3.1

Better Weld Bead Appearance

EnviroMIG copper free welding wire produces a cleaner finish and a bead less noticeable to the eye than traditional copper coated wire.

Good Resistance to Porosity with Zinc Primer

EnviroMIG guarantees...

• Fine penetration and fusion
• No welding defects
• No spatter
• No porosity

Excellent Re-strike Properties

Superior Product for Automated Welding Applications

EnviroMIG (in red) is much more concentrated and accurate whereas the copper coated welding wire (in blue) result is more dispersed and off target stretching to the right.

Enhanced Corrosion Resistance